Two-Point Line

General

  • Sketch segments by clicking the start and end point of a line.
  • Instead of the end point, you can enter the length of the line from the keyboard.
  • If you use X-, Y- or Z-locking, the program automatically adds a parallel constraint to the segment with respect to the line of the central cross.
  • If you use E-locking, the program automatically adds a parallel constraint to the reference line.
  • If you do not select a work plane, the segment is drawn on the drawing plane, the plane that is currently facing you.

Sketch a two-point line in a 3D sketch

  1. Select the function 3D sketch | Lines | Two Point Line or
    • select the context-sensitive function Line > 2 Points.
  2. If necessary, select the line properties, under 3D Sketch | Style
  3. If necessary, select Workplane to sketch a circle on an auxiliary plane.
  4. Select the line's start point.
  5. Select the line's end point.
    • Before clicking a point, you can use the direction lock provided by the cursor to the X, Y or Y direction.
    • You can also use shortcut keys to lock directions:
      • U: Locks the direction in the X axis of the model.
      • I: Locks the direction in the Y axis of the model.
      • O: Locks the direction in the Z axis of the model.
      • E: Locks the direction in the direction of the line under the cursor.
      • T: Works only if a 3D sketch work plane is selected. Locks the direction in a direction perpendicular to the line under the cursor.
      • F: Unlocks the cursor direction.
    • Instead of clicking a point, you can enter the relative or absolute coordinates of the point from the keyboard, at the same time the program adds a distance constraint to the line.
      • 100: The line is drawn 100mm long in the direction of the X-axis.
      • ,100: The line is drawn 100mm long in the direction of the Y-axis.
      • ,,100: The line is drawn 100mm long in the direction of the X-axis.
  6. Repeat steps 2 to 5 to continue sketching segments.
  7. Stop sketching segments
    • Select another function or
    • Press the middle mouse button or
    • Press the Esc key or
    • Press the V key (V = Confirm).

Sketching segments on a plane sketch differs in some respects from drawing segments in 3D sketching.